You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

How to extend USB cables

Extending USB Cables

  1. Extending the USB cable: If you would like to extend the length of the USB cable, we recommend that you use a powered USB-2 hub.  We also fund success using the following "active" cable extension from Amazon:
  2. A second recommended method for extending a USB cable is to use a powered USB Hub.  Please use a powered USB hub since that will tend to replicate and amplify the USB signals.
  3. If you are using a USB cable for the Pictomic turntables, please make sure you use the original cable or a USB-2 cable that is shielded and enhanced with ferrite to ensure the integrity of the USB-2 communication signal between the turntable and your computer. If you’re not using the original cable, you may experience issues where some communication signals don’t pass through correctly. This can result in the turntable performing only partial rotations or stopping mid-rotation.



  • No labels

Knowledge Base (KB) for Visere Captura – available at Pictomic's Store . (KB Version 2.0.)