Versions Compared

Old Version 4

changes.mady.by.user D. M.

Saved on

compared with

New Version Current

changes.mady.by.user D. M.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Operating SystemUSB Drivers LinkNotes
Windowshttps://ftp.pictomic.com/test_TurntableSDK/Drivers/D2XX/CDM21228_Setup.exe
Machttps://ftp.pictomic.com/test_TurntableSDK/Drivers/D2XX/D2xxHelper_v2.0.0.pkg
Linux

If running on Linux then proceed as follows:

  1. After unzipping the turntable controller software, switch to the Iconasys Turntable Controller location.

  2. Run the command: sudo ./IconasysTurntableController (or you can add usb permission to standard user if sudo is not permitted) 

  3. If you receive the message "Turntable not opened", the kernel automatically loaded another driver for the FTDI usb device, so you need to unload them as follows: a.

    1. sudo rmmod ftdi_sio

    b.

    1. sudo rmmod

    usbserial

    1. usbserial 

No driver in Linux, just the steps listed.

...