...
- In the upper right corner of Visere Captura click on the gearbox then click Select turntable.
- Choose the Iconasys Custom (Expert use) then click OK:
- Click on the Control Turntable button on the left side of Visere Captura.
- Click on the Advanced settings tab of the top of the Turntable Settings:
- Click on the Import settings ... to import the default settings for the turntable you are using. For example Platinum Large Mark II
- Set the number of new steps for a full turn. In all cases you should only change the settings for the number of steps, as these are the only things that can be off over time, or you may require more precision for your own table.
- Once complete, go back to your Basic settings.
In most cases, the most challenging part of calibration is determining the
...
correct number of steps
...
for a full rotation. Sometimes, our technical support team may
...
have already calculated this value for your specific turntable prior to shipment. If so, you should have received that information via email from our support team.
...
However, if you prefer to determine the correct number of steps
...
yourself,
...
please
...
continue to the next section for step-by-step instructions.
Determining the Correct Number of Steps
...