Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Click on the gearbox icon and go to About
  2. From the About dialog click on the Enable/Disable Plug-ins
     
  3. Select the libPTPCamera.so and make sure the Canon, Sony, and Nikon camera plug-ins are unchecked. 
    Tip
    titleEnable only PTP

    Visere Captura searches for cameras using the manufacturer's SDKs first.  To enforce the use of the PTP library, disable the other camera libraries.

  4. Ensure the the Mac Preview program is not running.
    Warning
    titleMac Preview Conflict

    If Mac's Preview program is running, then Visere Captura's PTP drivers cannot access the camera.

  5. Click OK and restart Visere Captura.
  6. If your camera is supported, Visere Captura will connect to it and show the type of controls available when you click the Control Camera button. For example, the Control Camera shows the following dialog for Canon's R100 camera:

    The Canon R100 is not fully supported by the Visere Captura PTP library, plugin at the time this article is written, and between of writing. Among the three types of PTP controls, the PTP library plugin can only control manage Live View and Configuration .  It for the Canon R100. Visere Captura has no support for Image CapturePTP support for “Image Capture” with the R100, but it does support the R100 via the Canon SDK drivers. This lack of PTP support is due to thelibgphoto2 library not supporting the Canon R100 as of now. Once the Canon R100 is added tolibgphoto2, we will update our PTP plugin, and Visere Captura will support the Canon R100 via PTP, too.

Content by Label
showLabelsfalse
max5
spacesVC
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ("libgphoto","mac","ptp","libgphoto2") and type = "page" and space = "VC"
labelsmac ptp libgphoto libgphoto2

...